Fluke
Showing 1–24 of 39 results
-
Digital Multimeter, Test & Measurement
Fluke 101 Basic Digital Multimeter
The Fluke 101 is a small, affordable digital multimeter for basic voltage, resistance, continuity, diode, capacitance and frequency checks in residential and light commercial work.
- Compact, lightweight design
- AC/DC voltage, resistance and continuity
- Capacitance and frequency
SKU: n/a -
Digital Multimeter, Test & Measurement
Fluke 107 Palm-Sized Digital Multimeter
The Fluke 107 is a palm-sized digital multimeter that packs voltage, current, resistance, capacitance and frequency into a compact, easy-to-carry tool for everyday electrical work.
- Fits in the palm of your hand
- AC/DC voltage and current
- Capacitance, frequency and duty cycle
SKU: n/a -
Digital Multimeter, Test & Measurement
Fluke 115 True-RMS Digital Multimeter
The Fluke 115 is a compact true-RMS multimeter designed for field service technicians, covering voltage, current, resistance, continuity, capacitance and frequency.
- True-RMS for accurate readings on non-linear loads
- AC/DC voltage and current up to 10 A
- Capacitance, frequency and diode test
SKU: n/a -
Digital Multimeter, Test & Measurement
Fluke 117 True-RMS Electrician’s Multimeter
The Fluke 117 is a true-RMS multimeter for electricians with built-in VoltAlert non-contact voltage detection and low-impedance mode.
- True-RMS
- VoltAlert non-contact voltage detection
- LoZ mode prevents ghost voltage
SKU: FLUKE-117-TRUE-RMS-ELECTRICIANS -
Insulation Tester, Test & Measurement
Fluke 1507 Insulation Resistance Tester
The Fluke 1507 is a compact insulation resistance tester with multiple test voltages up to 1000 V for motors, cables, switchgear and installations.
- Test voltages 50, 100, 250, 500 and 1000 V
- Insulation resistance to 10 GΩ
- Polarisation index and dielectric absorption ratio
SKU: FLUKE-1507 -
Insulation Tester, Test & Measurement
Fluke 1587 FC Insulation Multimeter
The Fluke 1587 FC combines a 1000 V insulation tester and a true-RMS digital multimeter in one tool, with Fluke Connect for logging and trending insulation results.
- Insulation tests at 50–1000 V up to 2 GΩ
- Full-featured true-RMS multimeter
- Low-pass filter for drive measurements
SKU: FLUKE-1587-FC -
Earth Resistance Tester, Test & Measurement
Fluke 1623-2 GEO Earth Ground Tester
The Fluke 1623-2 GEO is an earth ground tester supporting 3- and 4-pole fall-of-potential, selective and stakeless testing for earthing system verification.
- 3- and 4-pole fall-of-potential testing
- Selective testing without disconnecting the electrode
- Stakeless testing with clamps
SKU: FLUKE-1623-2 -
Earth Resistance Tester, Test & Measurement
Fluke 1625-2 GEO Advanced Earth Ground Tester
The Fluke 1625-2 GEO is the advanced earth ground tester, adding 2-pole testing, automatic frequency control and soil resistivity measurement to selective and stakeless methods.
- 2-, 3- and 4-pole testing and soil resistivity
- Selective and stakeless testing
- Automatic frequency control to avoid interference
SKU: FLUKE-1625-2 -
Power Quality Analyzer, Test & Measurement
Fluke 1736 Three-Phase Power Logger
The Fluke 1736 is a three-phase power logger for energy studies and load surveys, recording voltage, current, power and power factor with flexible iFlex current probes.
- Logs 3-phase voltage, current, power and energy
- Flexible iFlex current probes included
- Wi-Fi and app access for remote viewing
SKU: FLUKE-1736 -
Power Quality Analyzer, Test & Measurement
Fluke 1738 Advanced Three-Phase Power Logger
The Fluke 1738 is the advanced three-phase power logger, adding power quality parameters such as harmonics and events to energy and load studies.
- Logs energy, power and power quality parameters
- Harmonics and event capture
- iFlex flexible current probes
SKU: FLUKE-1738 -
Power Quality Analyzer, Test & Measurement
Fluke 1777 Three-Phase Power Quality Analyzer
The Fluke 1777 is a three-phase power quality analyzer for troubleshooting and compliance studies, capturing dips, swells, transients and harmonics to IEC 61000-4-30 Class A.
- Class A power quality measurement (IEC 61000-4-30)
- Captures dips, swells, interruptions, transients and harmonics
- Long-term logging with event capture
SKU: FLUKE-1777 -
Digital Multimeter, Test & Measurement
Fluke 179 True-RMS Digital Multimeter
The Fluke 179 is a true-RMS digital multimeter with built-in temperature measurement and backlight, a reliable all-rounder for electricians and maintenance technicians.
- True-RMS voltage and current
- Built-in thermometer with thermocouple probe
- Backlit display
SKU: FLUKE-179 -
-
Clamp Meter, Test & Measurement
Fluke 323 True-RMS Clamp Meter
The Fluke 323 is a true-RMS clamp meter for AC current up to 400 A and AC/DC voltage up to 600 V, an essential tool for general electrical troubleshooting.
- True-RMS AC current to 400 A
- AC/DC voltage to 600 V
- Resistance and continuity
SKU: n/a -
Clamp Meter, Test & Measurement
Fluke 324 True-RMS Clamp Meter with Temperature
The Fluke 324 adds temperature and capacitance measurement and a backlit display to the true-RMS 400 A clamp meter, useful for HVAC and electrical service.
- True-RMS AC current to 400 A
- Contact temperature measurement
- Capacitance measurement
SKU: n/a -
Clamp Meter, Test & Measurement
Fluke 325 True-RMS AC/DC Clamp Meter
The Fluke 325 is a true-RMS clamp meter that measures both AC and DC current up to 400 A, plus temperature, capacitance and frequency, for electricians and HVAC technicians.
- AC and DC current to 400 A
- True-RMS AC current and voltage
- Temperature, capacitance and frequency
SKU: n/a -
Clamp Meter, Test & Measurement
Fluke 376 FC True-RMS AC/DC Clamp Meter with iFlex
The Fluke 376 FC is a true-RMS AC/DC clamp meter to 1000 A with an iFlex flexible probe for up to 2500 A AC and Fluke Connect wireless logging.
- AC/DC current to 1000 A with the jaw
- iFlex flexible probe for up to 2500 A AC in tight spaces
- Fluke Connect app for logging and sharing
SKU: FLUKE-376-FC -
Power Quality Analyzer, Test & Measurement
Fluke 435-II Power Quality and Energy Analyzer
The Fluke 435-II is a three-phase power quality and energy analyzer that also calculates the cost of energy waste.
- Three-phase power quality
- Energy loss calculator
- Class A compliance
SKU: FLUKE-435-II-POWER-QUALITY -
-
-
Infrared Thermometer, Temperature Instruments
Fluke 62 MAX Infrared Thermometer
The Fluke 62 MAX is a rugged infrared thermometer measuring −30 °C to 500 °C with a 10:1 distance-to-spot ratio, sealed against dust and water and drop-tested to 3 m.
- −30 °C to 500 °C range
- 10:1 distance-to-spot ratio
- IP54 dust and water resistance
SKU: FLUKE-62-MAX -
Infrared Thermometer, Temperature Instruments
Fluke 62 MAX+ Dual-Laser Infrared Thermometer
The Fluke 62 MAX+ is a dual-laser infrared thermometer measuring −30 °C to 650 °C with a 12:1 distance-to-spot ratio, built for electrical, mechanical and HVAC checks.
- −30 °C to 650 °C range
- 12:1 distance-to-spot ratio
- Dual lasers outline the measurement area
SKU: FLUKE-62-MAX+ -
Pressure Calibrator, Pressure Instruments
Fluke 700G Reference Pressure Gauge
The Fluke 700G series are precision reference pressure gauges for testing and calibrating gauges and switches, with high accuracy.
- Precision reference gauge
- Multiple ranges
- Data logging (model dependent)
SKU: FLUKE-700G-REFERENCE-PRESSURE -
Pressure Calibrator, Pressure Instruments
Fluke 717 Pressure Calibrator
The Fluke 717 is a rugged single-function pressure calibrator with a built-in pressure sensor, mA measurement and 24 V loop power, used to calibrate gauges, switches and transmitters in the field.
- Internal pressure sensor, offered in several gauge ranges
- Measures mA with 24 V loop power for transmitter checks
- Pressure switch test function
SKU: FLUKE-717
