Fluke Distributor India
Showing 1–24 of 26 results
-
Digital Multimeter, Test & Measurement
Fluke 101 Basic Digital Multimeter
The Fluke 101 is a small, affordable digital multimeter for basic voltage, resistance, continuity, diode, capacitance and frequency checks in residential and light commercial work.
- Compact, lightweight design
- AC/DC voltage, resistance and continuity
- Capacitance and frequency
SKU: n/a -
Digital Multimeter, Test & Measurement
Fluke 107 Palm-Sized Digital Multimeter
The Fluke 107 is a palm-sized digital multimeter that packs voltage, current, resistance, capacitance and frequency into a compact, easy-to-carry tool for everyday electrical work.
- Fits in the palm of your hand
- AC/DC voltage and current
- Capacitance, frequency and duty cycle
SKU: n/a -
Digital Multimeter, Test & Measurement
Fluke 115 True-RMS Digital Multimeter
The Fluke 115 is a compact true-RMS multimeter designed for field service technicians, covering voltage, current, resistance, continuity, capacitance and frequency.
- True-RMS for accurate readings on non-linear loads
- AC/DC voltage and current up to 10 A
- Capacitance, frequency and diode test
SKU: n/a -
Insulation Tester, Test & Measurement
Fluke 1507 Insulation Resistance Tester
The Fluke 1507 is a compact insulation resistance tester with multiple test voltages up to 1000 V for motors, cables, switchgear and installations.
- Test voltages 50, 100, 250, 500 and 1000 V
- Insulation resistance to 10 GΩ
- Polarisation index and dielectric absorption ratio
SKU: FLUKE-1507 -
Insulation Tester, Test & Measurement
Fluke 1587 FC Insulation Multimeter
The Fluke 1587 FC combines a 1000 V insulation tester and a true-RMS digital multimeter in one tool, with Fluke Connect for logging and trending insulation results.
- Insulation tests at 50–1000 V up to 2 GΩ
- Full-featured true-RMS multimeter
- Low-pass filter for drive measurements
SKU: FLUKE-1587-FC -
Earth Resistance Tester, Test & Measurement
Fluke 1623-2 GEO Earth Ground Tester
The Fluke 1623-2 GEO is an earth ground tester supporting 3- and 4-pole fall-of-potential, selective and stakeless testing for earthing system verification.
- 3- and 4-pole fall-of-potential testing
- Selective testing without disconnecting the electrode
- Stakeless testing with clamps
SKU: FLUKE-1623-2 -
Earth Resistance Tester, Test & Measurement
Fluke 1625-2 GEO Advanced Earth Ground Tester
The Fluke 1625-2 GEO is the advanced earth ground tester, adding 2-pole testing, automatic frequency control and soil resistivity measurement to selective and stakeless methods.
- 2-, 3- and 4-pole testing and soil resistivity
- Selective and stakeless testing
- Automatic frequency control to avoid interference
SKU: FLUKE-1625-2 -
Power Quality Analyzer, Test & Measurement
Fluke 1736 Three-Phase Power Logger
The Fluke 1736 is a three-phase power logger for energy studies and load surveys, recording voltage, current, power and power factor with flexible iFlex current probes.
- Logs 3-phase voltage, current, power and energy
- Flexible iFlex current probes included
- Wi-Fi and app access for remote viewing
SKU: FLUKE-1736 -
Power Quality Analyzer, Test & Measurement
Fluke 1738 Advanced Three-Phase Power Logger
The Fluke 1738 is the advanced three-phase power logger, adding power quality parameters such as harmonics and events to energy and load studies.
- Logs energy, power and power quality parameters
- Harmonics and event capture
- iFlex flexible current probes
SKU: FLUKE-1738 -
Power Quality Analyzer, Test & Measurement
Fluke 1777 Three-Phase Power Quality Analyzer
The Fluke 1777 is a three-phase power quality analyzer for troubleshooting and compliance studies, capturing dips, swells, transients and harmonics to IEC 61000-4-30 Class A.
- Class A power quality measurement (IEC 61000-4-30)
- Captures dips, swells, interruptions, transients and harmonics
- Long-term logging with event capture
SKU: FLUKE-1777 -
Digital Multimeter, Test & Measurement
Fluke 179 True-RMS Digital Multimeter
The Fluke 179 is a true-RMS digital multimeter with built-in temperature measurement and backlight, a reliable all-rounder for electricians and maintenance technicians.
- True-RMS voltage and current
- Built-in thermometer with thermocouple probe
- Backlit display
SKU: FLUKE-179 -
Clamp Meter, Test & Measurement
Fluke 323 True-RMS Clamp Meter
The Fluke 323 is a true-RMS clamp meter for AC current up to 400 A and AC/DC voltage up to 600 V, an essential tool for general electrical troubleshooting.
- True-RMS AC current to 400 A
- AC/DC voltage to 600 V
- Resistance and continuity
SKU: n/a -
Clamp Meter, Test & Measurement
Fluke 376 FC True-RMS AC/DC Clamp Meter with iFlex
The Fluke 376 FC is a true-RMS AC/DC clamp meter to 1000 A with an iFlex flexible probe for up to 2500 A AC and Fluke Connect wireless logging.
- AC/DC current to 1000 A with the jaw
- iFlex flexible probe for up to 2500 A AC in tight spaces
- Fluke Connect app for logging and sharing
SKU: FLUKE-376-FC -
Infrared Thermometer, Temperature Instruments
Fluke 62 MAX Infrared Thermometer
The Fluke 62 MAX is a rugged infrared thermometer measuring −30 °C to 500 °C with a 10:1 distance-to-spot ratio, sealed against dust and water and drop-tested to 3 m.
- −30 °C to 500 °C range
- 10:1 distance-to-spot ratio
- IP54 dust and water resistance
SKU: FLUKE-62-MAX -
Infrared Thermometer, Temperature Instruments
Fluke 62 MAX+ Dual-Laser Infrared Thermometer
The Fluke 62 MAX+ is a dual-laser infrared thermometer measuring −30 °C to 650 °C with a 12:1 distance-to-spot ratio, built for electrical, mechanical and HVAC checks.
- −30 °C to 650 °C range
- 12:1 distance-to-spot ratio
- Dual lasers outline the measurement area
SKU: FLUKE-62-MAX+ -
Pressure Calibrator, Pressure Instruments
Fluke 717 Pressure Calibrator
The Fluke 717 is a rugged single-function pressure calibrator with a built-in pressure sensor, mA measurement and 24 V loop power, used to calibrate gauges, switches and transmitters in the field.
- Internal pressure sensor, offered in several gauge ranges
- Measures mA with 24 V loop power for transmitter checks
- Pressure switch test function
SKU: FLUKE-717 -
Pressure Calibrator, Pressure Instruments
Fluke 718 Pressure Calibrator with Built-in Pump
The Fluke 718 is a portable pressure calibrator with an integrated pneumatic hand pump, so you can generate and measure pressure for low-pressure transmitters, gauges and switches with one tool.
- Integrated pneumatic pump with fine-adjust vernier
- Built-in pressure sensor (range per model)
- mA measurement with 24 V loop power
SKU: FLUKE-718 -
Pressure Calibrator, Pressure Instruments
Fluke 719 Electric Pressure Calibrator
The Fluke 719 is an electric pressure calibrator with a built-in motorised pump that generates pressure at the push of a button, making single-person transmitter calibration fast and repeatable.
- Built-in electric pump, no hand pumping
- Programmable pump limit to avoid over-pressure
- Source and measure mA with loop power
SKU: FLUKE-719 -
Pressure Calibrator, Pressure Instruments
Fluke 721 Dual-Sensor Precision Pressure Calibrator
The Fluke 721 is a precision pressure calibrator with two isolated internal pressure sensors, ideal for custody-transfer gas flow and checking static and differential pressure at once.
- Two isolated internal pressure sensors
- High accuracy for flow computer and gas custody-transfer checks
- Optional RTD probe for temperature measurement
SKU: FLUKE-721 -
Process Calibrator, Test & Measurement
Fluke 725 Multifunction Process Calibrator
The Fluke 725 is a multifunction process calibrator that measures and sources mA, volts, frequency, RTD and thermocouple signals, and pressure with 750P modules, covering most plant calibration work in one tool.
- Measure and source mA, V, frequency, Ω, RTD and thermocouple
- Pressure measurement with Fluke 750P modules
- 24 V loop power for transmitters
SKU: FLUKE-725 -
Process Calibrator, Test & Measurement
Fluke 726 Precision Multifunction Process Calibrator
The Fluke 726 is a higher-accuracy version of the multifunction process calibrator, adding pressure switch testing, flow calculation and a HART-compatible loop resistor.
- Higher measurement and source accuracy than the 725
- Pressure switch test and transmitter error calculation
- Built-in 250 Ω resistor for HART communication
SKU: FLUKE-726 -
Pressure Calibrator, Pressure Instruments
Fluke 729 Automatic Pressure Calibrator
The Fluke 729 is a documenting automatic pressure calibrator: its built-in electric pump reaches and holds the target pressure automatically, and it records results for audit-ready calibration.
- Automatic pressure generation and fine control
- Documenting: stores tasks and results
- HART communication on supported models
SKU: FLUKE-729 -
Pressure Instruments, Pressure Module
Fluke 750P Series Pressure Modules
Fluke 750P pressure modules extend Fluke 7xx calibrators with gauge, differential, absolute and vacuum ranges from very low draft pressures to high hydraulic pressures.
- Gauge, differential, absolute, vacuum and dual ranges
- Compatible with Fluke 717, 718, 719, 721, 725, 726, 729, 754 and others
- Plug-and-play: calibrator reads range automatically
SKU: FLUKE-750P-SERIES -
Test & Measurement, Vibration Meter
Fluke 805 FC Vibration Meter
The Fluke 805 FC is a vibration meter that gives a quick, repeatable assessment of overall vibration and bearing condition on motors, pumps, fans and compressors.
- Overall vibration and bearing condition (crest factor+)
- Four-level severity scale
- Sensor tip design reduces measurement variation
SKU: FLUKE-805-FC
